SAPI high-performance injector sandblasting cabin type "Büffel 180" with an integrated cartridge filter system
The suction sandblasting cabin of the "Büffel 140" type is a compact injector sandblasting cabin with an integrated cartridge filter suction system. Thanks to the permanently installed filter system, the sandblasting cabin only requires little space and can be easily moved using a lift truck or forklift.
Due to the compact design of the sandblasting cabin, it is immediately ready for use, only the compressed air and power supply has to be established and the sandblasting agent must be filled.
The integrated cartridge filter extraction system guarantees an optimal view of the sandblasting room. At the same time, optimal abrasive cleaning is achieved so that the abrasive can be reused as often as possible. By using the most modern fan technology, an extremely low power consumption (0.55 kW) is achieved, which makes the injector sandblasting cabin extremely economical.
Our high-performance injector sandblasting head (fresh sandblasting head) achieves a high negative pressure and thereby achieves a high sandblasting power, which enables fast, economical work with the negative pressure sandblasting cabin. The sandblasting nozzle is made of boron carbide and has an extremely long service life, even when using corundum sandblasting media.
To illuminate the sandblasting room, a modern, energy-saving LED light is attached to the cabin roof, protected from dust. This ensures optimal illumination of the sandblasting room of the sandblasting cabin and enables fast, fatigue-free and economical work.
Our sandblasting cabins are made of strong sheet steel, which enables the work grate to have a high load-bearing capacity.
All SAPI sandblasting cabins meet all current safety standards and are equipped with a door safety switch, which stops the sandblasting process immediately if the cabin is opened during the sandblasting process.
Corundum, glass beads, plastic granules, vegetable granules, etc. can be used as sandblasting media.
Technical specifications:
Overall dimensions |
Total height: |
1.950 mm |
Total width: |
2.000 mm |
Total depth: |
2.100 mm |
Dimensions sandblasting room |
Width: |
1.750 mm |
Depth: |
1.400 mm |
Height: |
900 mm |
Technical characteristics |
Air consumption: |
600 - 2.000 l/min |
Nozzle: |
2 Stück Ø 8 mm Boron carbide sandblasting nozzle (optionally other diameters) |
Air nozzle: |
Ø 3,5 mm |
Air pressure: |
2 bis 12 bar |
Load capacity of the grating: |
ca. 300 kg |
Filter area: |
20 m² |
Electrical connection: |
400 Volt / 50 Hz (16 A Stecker) |
Power consumption: |
ca. 1.400 Watt |
Color: |
Basic body RAL 7035 light grey Add-on parts RAL 7016 anthracite grey |
Weight: |
ca. 720 kg |
Technical changes reserved! |
Scope of delivery:
- "Buffalo 180" sandblasting cabin
- Fresh sandblasting head with boron carbide sandblasting nozzle
- Pressure regulator to adjust the sandblasting pressure with integrated water separator
- LED lighting, attached to the cabin roof to protect it from dust
- Door security switch
- On/off footswitch
- Rubber rosettes
- 1 pair of rubber gloves (emitter gloves)
Advantages of the SAPI high-performance injector sandblasting cabin:
- Universally applicable sandblasting cabin for economical, highly efficient execution of all sandblasting work
- Suitable for all common types of abrasive
- Extremely robust front flap system developed by practitioners for maximum durability and dust-tightness
- Compact, portable design with an integrated cartridge filter system
- Extremely bright, glare-free illumination of the sandblasting cabin interior with LED light
- Extremely economical price/performance ratio
- Movable with a pallet truck, wheelchair-accessible construction
Application areas:
- Rust removal
- Paint stripping
- Descaling
- Deburring
- Hardening
- Lapping
- Glass bead rays
- Aluminium and stainless steel processing
- Roughening surfaces
- Smoothing surfaces
Suitable abrasives:
- Corundum
- White corundum
- Ceramic beads
- Glass beads
- Broken glass
- Silicon carbide
- Garnet sand
- Plastic abrasives
- mineral reusable abrasives
Injector sandblasting cabins are not suitable for the use of metallic sandblasting media. A pressure blasting cabin is required for this.